Art Brunette

Recommendations for the care of handmade epoxy resin decor

How to Properly Attach the Hands on a Wall Clock

The clock hands are very delicate, so please handle them with care. When attaching the hands, hold them close to the center hole—avoid pressing on the edges.
If the hands on your clock are already attached, you can skip straight to step 6.
1. Start by placing the hour hand (shorter one) onto the mechanism.2. Next, add the minute hand (longer one).3. Make sure there is a small gap between the hands so they don’t touch or rub against each other.4. Attach the cap nut or the second hand, and check that it fits securely and doesn’t fall off.5. Gently align both hands to the 12 o’clock position.6. Insert a new (not used) battery.7. Place the clock in a horizontal position.8. Set the correct time using the small wheel on the back of the clock mechanism.9. Then hang it on the wall or lean it the wall (do not lay).Later, check if the clock shows the correct time.
Sometimes the clock doesn't start right away. If the clock shows the wrong time or doesn’t run, remove the battery, take off all the hands, and repeat the setup step by step.
Let me know if you need help with anything!

Epoxy resin clocks and decor on MDF board

Illustration

Care instructions for epoxy resin clocks and decor on MDF board:- Wipe the surface with a dry or damp microfiber cloth. Epoxy resin clocks are susceptible to scratches.- Store in a dry place. Avoid exposure to moisture. Do not wash the clock under running water.- Epoxy resin products have a natural tendency to yellow over time. To preserve their attractive appearance for as long as possible, avoid prolonged exposure to direct sunlight.- Do not use abrasive, chemical, aggressive materials and substances to care for the clock.- Periodically check the fastening of the clock to the wall so that it does not fall and is not damaged.- Wind the clock only using the mechanism. Do not turn the hands by hand.- Not suitable for the bathroom.- Don't wash in the dishwasher.
Sometimes, depending on storage conditions, epoxy resin surfaces may develop slight cloudiness or a mottled appearance — this is a natural characteristic of the material.


The clocks is made entirely of epoxy resin

Illustration

Care instructions for clocks made entirely of epoxy resin:- Wipe the surface with a dry or damp microfiber cloth. Epoxy resin clocks are susceptible to scratches.- Epoxy resin products have a natural tendency to yellow over time. To preserve their attractive appearance for as long as possible, avoid prolonged exposure to direct sunlight.- Do not use abrasive, chemical, aggressive materials and substances to care for the clock.- Periodically check the fastening of the clock to the wall so that it does not fall and is not damaged.- Wind the clock only using the mechanism. Do not turn the hands by hand.- Suitable for use in the bathroom.- Don't wash in the dishwasher.
Sometimes, depending on storage conditions, epoxy resin surfaces may develop slight cloudiness or a mottled appearance — this is a natural characteristic of the material.

Epoxy resin tables

Illustration

Care Instructions for Your Epoxy Resin Table:- Wipe the surface with a dry or damp microfiber cloth. Epoxy resin tables are susceptible to scratches. Do not use rough or abrasive cloths when cleaning — a soft cloth is best.- Epoxy resin products have a natural tendency to yellow over time. To keep your table looking beautiful for as long as possible, avoid prolonged exposure to direct sunlight.- Do not use abrasive, chemical, aggressive materials and substances to care for the table.- Please do not place hot items directly on the epoxy surface — always use coasters or mats.Avoid cutting or hitting the table with sharp or heavy objects.- Like any furniture, your epoxy resin table may show signs of wear over the years. However, the tabletop can be restored through re-sanding and polishing if needed.- Treat your table with care, and it will serve you beautifully for many years to come.
Sometimes, depending on storage conditions, a cloudy or speckled appearance may develop on the surface of an epoxy resin table. This is a natural characteristic of the material.

Mirrors

Illustration

Mirror Care InstructionsTo keep your piece in excellent condition, we recommend following these guidelines:- Clean the mirror surface with a soft microfiber cloth, either dry or slightly damp. You may use glass or mirror cleaning products, as long as they do not contain alcohol or acetone.- Wipe the epoxy resin part with a dry or slightly damp microfiber cloth.- Do not use abrasive or chemically aggressive cleaners.- Avoid direct sunlight on the resin surface.- If your mirror has an MDF/HDF base, avoid placing it in humid or wet areas. Store the mirror in a dry indoor space.
Sometimes, depending on storage conditions, a cloudy or speckled appearance may develop on the surface of an epoxy resin table. This is a natural characteristic of the material.

Epoxy resin Tableware

Illustration

Care Recommendations for Epoxy Resin Tableware:You can:1. Wipe the surface with a soft microfiber cloth.  2. Wash under warm running water using a soft sponge.Do not:1. Place hot dishes or hot food on the surface.  2. Cut or use sharp objects on the surface.  3. Use rough or abrasive cleaning materials.  4. Leave in direct sunlight or near radiators/heaters for extended periods.  5. Use harsh chemical cleaners or put in the dishwasher.
Sometimes, depending on storage conditions, epoxy resin surfaces may develop slight cloudiness or a mottled appearance — this is a natural characteristic of the material.